Showing posts with label paper tearing. Show all posts
Showing posts with label paper tearing. Show all posts

Wednesday, January 10, 2007

Project - Make a Wintery Artist Trading Card

Winter sends chills down my spine while bringing out the kid in me at the same time. Join me in embracing the cold with this quick and easy artist trading card or ATC.

Tiny Snowflakes Grace an Artist Trading Card
Tiny Snowflakes Grace an Artist Trading Card (click to enlarge)

Materials & Tools
· White Card Stock, 2.5 by 3.5-inch
· Turquoise or Other Blue Card Stock, 2.5 by 3.5-inch
· White Vellum Scrap
· 1 piece of silver metallic or hologram style ribbon, 1/2-inch wide by roughly 3 inches long
· 3 tiny (1/2-inch) plastic snowflake ornaments, the kind used to decorate miniature desktop Christmas trees
· Scrap piece of card stock, any color, about the width of the ribbon
· Glue stick, double-stick tape or your adhesive of choice for applying the paper layers
· 1/4-inch diameter pop dots by All Night Media, for adhering the snowflakes to the ribbon
· Good pair of comfortable, teflon-like coated scissors, like Velvet Touch Scissors by Armada
· Fiskars Paper Edgers, with the postage stamp edging
· Paper trimmer, like 12" Portable Paper Trimmer by Fiskars
· 1 fl. oz. bottle of Scribbles 3D Paint in Glittering Crystal

The Steps

1. Using the paper trimmer, cut two identically-sized pieces of card stock -- one white, the other blue.

2. Tear one of them lengthwise -- your choice, depending on which color you'd like to layer on top.

3. Mount the torn card stock on top of the other piece. Using your fingers, rub the torn edge to make it roll back a bit.

4. Tear and crumble the piece of vellum then wrap it around the layered ATC base. Tape the vellum on the back of the card to secure it in place.

5. Cut a 3.5 inch piece of metallic holiday ribbon. Tape it to a piece of card stock.

6. Mount the snowflakes on the front of the mounted ribbon using the adhesive dots. If the snowflakes are for tree decor, remember to cut off holes and threads first.

7. Using the Fiskars scissors, cut the metallic ribbon at an angle in between the snowflakes.

8. Mount the individual snowflake embellishments onto the front of the artist trading card using double-stick tape.

9. Using the 3D glittery paint, paint blustery swirls on the top of the vellum scrap. Be careful not to add too much paint or your vellum will bubble and warp. Be creative. Think about swirling winter breezes and Old Man Winter. Let dry overnight.

10. Share your finished ATC with a friend on a chilly winter evening.



Product Resource Guide
· Project photo taken with a 5.0 MP resolution KODAK EASYSHARE DX4530 Zoom Digital Camera
· White Card Stock - 8-1/2"x11" 50 Sheet Pack
· Riverside Paper Array® 65-lb. Card Stock, 8-1/2 x 11, Assorted Parchment Colors, 100 Sheets/Pk 01235 / RIV01235
· Vellum Paper Packs by DMD
· Scrap piece of card stock the width of the ribbon
· Glue Stick, Disappearing, Acid Free, .77, Purple
· Fiskars Paper Edgers, with the postage stamp edging
· Fiskars 12-Inch Euro Paper Trimmer
· Browse for Paper Crafts Books at Amazon.com

Article Description: Here is a simple artist trading card to make with leftover bits of vellum and holiday decor.

Saturday, September 09, 2006

Project - Alter a Spiral Notebook

Spruce up a small spiral notebook by replacing and decorating the cover.
by Kim M. Bayne

Altered Spiral Notebook by Kim M. Bayne

Has this ever happened to you? You're out shopping and you suddenly think of a great crafts project. But you don't have anything to write on. So you buy the nearest thing -- a boring-looking spiral with plain notebook paper so you can jot down and remember your idea.

Several years back, I did just that. Now I keep that notebook in the car so I can sketch ideas anytime during car trips when a family member is driving.

But the other day, I looked at it closely. It was dog-eared, worn and sorry-looking. I didn't want to start over with a new sketchbook and I felt this one needed a bit of sprucing up.

My style? Very eclectic. I love mixing earth-tones with a surprising splash of modern metal -- so you'll notice I added silver beads and silver ribbon.

And while I stuck mostly with blues and neutrals, I couldn't resist throwing in a bit of olive-drab satin ribbon on the spiral plus a hint of gold with a star-shaped paper clip.

Here's what I did to my sketch book's front cover. Enjoy.

Altered Spiral Notebook

Materials & Tools
* Mead Fat Lil' Notebook, spiral-bound with 200 ruled sheets, sheet size 5.5 by 3.5 inch
* 1 piece of heavy-duty plain cardboard, discarded from packaging
* 1 piece of 80 lb. uncoated scrapbooking paper, like packages of 12 by 12-inch sheets by Provo Craft
* 1 piece indigo blue 80 lb. cardstock
* 1 piece of imprinted beige canvas ribbon with the word "inspire", 3/4-inch wide by 4.5 inches long
* 1 piece of silver metallic wire-edged ribbon, 1/2-inch wide by 5.5 inches long
* Assorted decorative, shaped metallic paper clips, with shapes like spirals, stars, etc.
* 1 scrap of brown rope netting
* 5 tarnished, flat silver beads or bead spacers, averaging 1/4-inch diameter each
* 3 discarded, dirty keys
* Assorted ribbons and strings, each about 4 inches long
* An extra 10-inch piece of brown string, for weaving through the netting
* Permanent bond glue stick, like Glue Stick Clear .70 oz by MANCO
* 1/2-inch wide double-stick tape, like Terrifically Tacky Tape by Art Accentz/Provo Craft
* 3/16-inch diameter mini glue dots by Glue Dots International
* 1/4-inch diameter pop dots by All Night Media, for adhering the silver beads
* Handheld paper punch, like 1/8-inch Round Punchline Punch Item #52400 by McGill
* Ordinary pencil, for marking where to cut on the cardboard and paper
* Jewelry pliers for bending the notebook spiral, for both removal and reattachment
* Good pair of comfortable, teflon-like coated scissors, like Velvet Touch Scissors by Armada, or a craft knife and a straight edge

The Steps
(Click to enlarge images. Click the back button to return to this article.)
1. Using the pliers, bend and remove the spiral from the notebook. Carefully put the notebook aside so you're able to put it back together later.
Click thumbnail to enlarge photoClick thumbnail to enlarge photo

2. Use the original notebook cover to measure and cut a replacement cover out of the plain heavy cardboard, which you'll decorate. You can also decorate your original cover, if you wish. I chose to replace mine because it was plastic and I wanted a paper surface to work on.

3. Apply glue stick to the back of the scrapbook paper and adhere to your new cover.

4. Tear across the indigo blue cardstock to create an artsy edge. Use the glue stick to attach the cardstock on top of the scrapbook paper.
Click thumbnail to enlarge photo

5. Turn over the notebook cover and use your scissors to trim the extra paper and card stock to fit the cover.

6. Use the hole punch to create holes in the new cover -- use the old cover to help line up where the holes need to go. Remember to hold steady and punch hard so you can go through all layers.
Click thumbnail to enlarge photo

7. Apply flat ribbons to the front of the cover with the tacky double-stick tape.
Click thumbnail to enlarge photoClick thumbnail to enlarge photo

8. Add the paper clips to the cover edge.
Click thumbnail to enlarge photo

9. Position the keys on the cover over selected holes. Once you decide where you want to position the keys, put the notebook back together.
Click thumbnail to enlarge photo

10. Wind the spiral through the new cover, stopping to put the keys on the spiral to hold them in place. Remember to use the jewelry pliers to bend the ends of the spiral again so the cover stays in place.

11. Hold the keys on the cover using the glue dots -- see the photo for a close-up of one key with the tiny glue dots on its back.
Click thumbnail to enlarge photo

12. Randomly tie pieces of ribbon and string to the spiral -- one or more pieces of ribbon for each cover hole. To hold them securely, use a square knot. If you're concerned about the fibers coming loose, use a tiny dot of tacky glue on each knot.
Click thumbnail to enlarge photo

13. Using the pop dots, attach the silver beads to the cover. If you don't like the 3D look of the pop dots, use flatter glue dots to adhere the beads.
Click thumbnail to enlarge photo

14. To tie the scrap of brown netting to the cover, punch a few holes through the cover (close together) and tie off with brown string. You can untie/re-tie a few pieces of ribbon or string near the spiral to anchor the left-hand side of the netting, too. Finally, if you have any left-over brown
string, you can weave it through one edge of the netting, like I did here.
Click thumbnail to enlarge photo

Remember to go back up to the top of this article to see the finished notebook again. For a variation on the same theme, look below.

Altered Spiral Notebook by Kim M. Bayne




Credits
* Most project photos on this page were taken with a 5.0 MP resolution KODAK EASYSHARE DX4530 Zoom Digital Camera

Wednesday, February 18, 2004

Project - Artist Trading Cards - An Arizona Sunset

One of the biggest trends in paper crafting is Artists Trading Cards. These 2.5 by 3.5 rectangular cards are the artist's equivalent of business cards. Scrapbooking conferences and similar expos often have trading sessions where attendees can swap and build a great collection of cards.

If you haven't tried your hand at making your own ATCs, I'll take you through the steps of how I built my own. Here is the first in a series of articles on creating ATCs.

The theme for an ATC can be anything you desire. I live in Tucson and creating artist trading cards with a local theme was a natural for me. First up, an Arizona sunset ATC. I used layers to create a floating three-dimensional look for the cards.

Artist Trading Card Sunset Lesson by Kim Bayne
CLICK IMAGES TO ENLARGE

Materials & Tools List
· Picture of Arizona sunset cut from a local brochure
· Plastic or Acetate
· Cardstock for your ATC "canvas"
· Dark Brown Paper with a Leather-like Texture
· Puffy 3D Star Stickers in Colors
· White Sticker Paper or Label Stock
· Green and Beige Inkpads, Different Shades
· Medium Point Black Marker
· Scissors and/or Paper Trimmer
· Scallop Corner Punch from Armada Art 6-Pack Corner Punch Art Set
· Double Stick Tape or Scrapbooking Adhesive Tape

The Steps
(Click to enlarge each image. Another browser window will open.)

1. Cut color pictures from magazines or glossy brochures to suit your theme. Crop each image to 2.5 by 3.5 inches each. Cover up any writing on the image with matching color markers.


2. Cut clear plastic pieces to 2.5 by 3.5 inches each.


3. Cut card stock pieces to 2.5 by 3.5 inches each.


4. Freehand draw or trace the outline of a Saguaro cactus onto the back of white sticker paper.


5. Using a direct-to-paper technique, dab or rub green inkpads onto the front of the sticker paper. Use a blender pen or tissue to blend the colors to create a softer look for the cactus green.

6. Cut out the cactus shape from the sticker paper. Using a black marker, freehand draw scribbles and lines to create the shading in the cactus.


7. Peel the backing off the cactus and stick it to the plastic layer, slightly right of center.

8. Tear a 1/2-inch wide piece of brown paper. Adhere the brown piece to the front of the plastic layer at the bottom of the cactus. This becomes the "ground."


9. Assemble the ATC card layers in this order: plastic layer with cactus, Arizona sunset layer then card stock layer with any printed side hidden in the "sandwich."


10. You might not be able to fit the top left corner into the corner punch after you apply the puffy stars, so cut the top corners now. Hold, but don't glue, the three ATC layers together. Position the card sandwich into the punch, then carefully cut the top corners.


11. Apply three star stickers of different sizes to the front of the plastic layer, in the sky to the left of the cactus.

12. Apply adhesive directly behind the cactus, brown paper and stars on the back of the plastic layer. Adhesive should be hidden when you assemble the layers. Do not apply adhesive anywhere else on the plastic unless you want it to be visible from the other side. Place the plastic layer on top of the sunset layer, being careful to align the scalloped corners.


13. Apply adhesive to the back of the sunset layer and attach it to the card layer, again aligning the scalloped corners. If you didn't cut them the first time, you can now cut the bottom corners with the scallop punch.

14. Sign the back of your ATC to identify yourself. I include a sticker with my name and email address instead -- it's faster for me and easier to read at a glance. In addition, you may wish to number each ATC you create as part of a series. I number mine in batches of nine, since trading card sleeves hold nine cards. This Arizona sunset artists trading card is my first in a series of identical cards. I labeled it 1 of 9.

Project Tips
· When you go to a trade show, everyone wants to stick brochures in your hand. Take a quick glance at the images before you say "no." You might decide to take this free paper home and recycle it after you read it.
· Old plastic report covers are great for recycling into ATCs. I've used both clear and colored vinyl covers for my ATC creations. Whenever my daughter wants to throw away an old folder or report cover, I try to salvage a 2.5 by 3.5 inch piece before it hits the trash.
· Second choice for plastic: packages, packages, packages. Open something you bought at a store and you've probably got clear plastic you can recycle into an ATC.
· Discarded folders and old cardboard take-out menus are great for free, interesting card stock. I recycled a local pizza parlor menu for this ATC.
· If you use layers, decide if you want to cut your paper corners before or after the ATC is assembled. You may have to experiment to see what works best for your design.




Product Resource Guide
Find your choice of materials online. Shop for:
· Dotto Adhesive Applicator
· Scotch Double Stick Tape
· Jo-Ann Scrap Essentials 3pc Precision Scissors
· Fluid Chalk Inkpad-Dark Moss
· ColorBox Pigment Ink Pads
· Fujifilm Photo Sticker Paper
· Avery White Inkjet Labels, Shipping, 3 1/3in. x 4in
· EK Success Corner Adorner Punch - Corner Stone
· Victorian Frame
· Dual Sided Cardstock, 12x12" - Neutral Colors
· Brown Decorative Paper at Amazon.com
· Most project photos on this page were taken with a 5.0 MP resolution KODAK EASYSHARE DX4530 Zoom Digital Camera